Local residence time,residence revolution,and residence volume distributions in twin‐screw extruders

This work was aimed at studying the overall, partial, and local residence time distributions (RTD); overall, partial and local residence revolution distributions (RRD) and overall, partial and local residence volume distributions (RVD) in a co‐rotating twin screw extruder, on the one hand; and establishing the relationships among them, on the other hand. Emphasis was placed on the effects of the type and geometry of mixing elements (a gear block and various types of kneading elements differing in staggering angle) and process parameters on the RTD, RRD and RVD. The overall and partial RTD were directly measured in‐line during the extrusion process and the local ones were calculated by deconvolution based on a statistical theory. The local RTD allowed comparing the mixing performance of mixing elements. Also it was confirmed both experimentally and theoretically that specific throughput, defined as a ratio of throughput (Q) over screw speed (N), controlled all the above three types of residence distributions, be they local, partial or overall. The RRD and RVD do not provide more information on an extrusion process than the corresponding RTD. Rather they are different ways of representing the same phenomena. POLYM. ENG. SCI., 48:19–28, 2008. © 2007 Society of Plastics Engineers     

15000 m^3／h制氧机组同步电动机起动技术研究

介绍液态软起动技术在济钢 15000 m3/h制氧机配套的 6000 kW同步电动机上的应用情况,阐述了系统的原理、特点、仿真计算及实际应用后达到的效果.     

支持向量机推广能力估计方法比较

支持向量机是一种新的机器学习算法，与其它学习算法相比，它的最大优点是基于结构风险最小化原则，因而能够保证推广能力。推广能力估计是机器学习中的一个重要问题，是实现自适应调整、参数选择、模型选择的等方法的基础。本文详细比较当前较有影响的几种推广能力估计方法，指出了这些方法适应范围和优缺点，并结合各种方法的原理讨论了推广能力估计可能的发展方向。     

20T/H工业锅炉主汽压回路参数寻优自适应PID控制

本文给出了一个自适应PID调节器应用于工业锅炉燃烧系统控制的实例,为克服自适应 控制中所遇到的实际问题,采用了监控级专家控制.实际运行表明,该系统优于常规PID调节器.     

复印粉的粉碎分级技术

本文介绍了利用国产气流粉碎机和余气萃取分级制备复印粉的实用技术，并展示了粉碎分级系统和复印粉的电镜照片。     

非线性隔振理论初探

本文以线必阻尼，立方刚度非线性系统为例，对非线性隔振理论进行了初步探讨，导出了系统的无量纲运动响应和传递率，并与线性隔振系统进行了比较，着重讨论了非线性对它们的影响，获得了一些有用的结论。     

Microstructure and Its Influence on Mechanical Behaviour of Directionally Solidified DZ38G Superalloy

The features of microstructure and theirinfluence on mechanical properties onstress-rupture as well as thermal fatigue ofdirectionally solidified DZ38G nickel-base su-peralloy have been investigated.It has beenfound that the contents of carbides on grainboundaries are increased and morphology of γ'-precipitates has been changed after testing.Particularly γ'-precipitates coalesced intoraft-like in morphology perpendicular to theapplied stress-axis have been observed thathas no detrimental effect on the stress-rupturebehaviour.The tendency of σ-formation hasalso been discussed.The σ-phase can be avoidedwhen the process parameters are chosenappropriately during solidification.     

变温条件下HDPE/CB的正电子湮灭特性

对掺杂了25份（phr）导电炭黑（CB）的样品进行了正电子湮灭寿命谱的变温测量，在玻璃化转变温度以上，随着温度的增加，自由体积的大小线性增加，在玻璃化转变温度以下，自由体积的大小基本不变，o-Ps的强度在－40℃下基本不变，从－40℃以上开始增加，但在50℃以上上升有加快的趋势，与PTC材料的PTC现象和导电性能有一定的关联。     

真空技术在污水处理中的若干典型应用

介绍了真空技术在污水处理中的几种典型应用，真空结晶法在以分离污水中具有结晶性能的固体溶剂；真空过滤脱水用于初沉池和消化池污泥脱水，真空浮选法通过制造负压条件加速浮选过程；还有真空搅拌、真空脱气等等。这些足以说明真空技术在污水处理乃至环境保护中占有重要的一席之地。     

溶胶-凝胶法制备疏水型SiO-2气凝胶

以正硅酸乙酯 (TEOS)为硅源 ,用三甲基氯硅烷 (TMCS)为疏水试剂 ,通过溶胶 凝胶法在室温下制备出疏水型SiO2 气凝胶。用傅立叶变温红外 (FT IR)、扫描电镜 (SEM)、透射电镜 (TEM)和吸水性能对疏水型SiO2气凝胶的结构和性能进行了研究